BRAND | Steimel |
Product | T 3 - 80 P - GKGM |
Description | gear pump |
Internal code | IMP4760920 |
Technical specification | in accordance with Directive 2014/34/EU (ATEX) Item number: AT3-211857U Item No. (pump): BT3-A031U Dimension sheet: DPA003-130146U Dimension sheet (pump): DPP003-A031U Spare parts list (pump): DET003-A031U Operating manual: DBA-ZP02 : DBA-ZP-ATEX-01 Suction and pressure connection: G 1 Material design: Body parts: EN-GJL-250 (EN-JL 1040) Drive and counter sprocket: 16 MnCrS 5, hardened and straight-toothed Shaft seal: Buramex SF pack Bearing bushings: Bronze AW increased bearing clearance: without Extraction hole: without Temperature monitoring on the stuffing box: BTW062, 1 cold conductor (NAT 100) wired to terminal box IBExU 14 ATEX 1291 X Release device for cold conductors: on site Conveying medium: solvent-based paints + paints, Pigment-containing, max. 100 μm particle size Viscosity: 50 - 5000 mPas Temperature: max 70°C Rinsing with solvent (viscosity 30-1000 mPas) approx. 10% of Timeline Conveying data Q: 65 - 1,130 l/h (5 - 87 Hz) 700 l/h = 50 Hz p: max. 3 bar n: 20 - 335 rpm Direction of rotation: right (with direction arrow) Test run: yes, with HLPD 46 Pre-cleaning: rinse with white spirit Attention: Silicone-free pump! The pump became tested with mineral oil and must be rinsed on site before commissioning! Information sign: EAY924-----PL02 Base plate: EGP913060-24BB05 Base plate with vibration dampers for free installation on Hall floor, article. -No.: ILW040x30-55 and with 4x diameter 14mm mounting holes Coupling: BKUP096-1825-001 Clutch protection: BKS918100110AC03 (brass sheet tread-resistant) Documents for transmissions: EUL---015160BB01 Pump pad: EUL---005110BB02 with helical gearbox with mounting flange for ICE standard motor + Coupling, foot version Manufacturer: Getriebebau Nord (with ATEX certificate) Type: SK 372.1 - IEC 90 Item no.: IUL-SK372-18 Output speed: 195 rpm, i= 7.23 (5 - 87 Hz) Motor size: IEC 90 Design: B3 Output shaft: 25x50 mm Installation position: M1 normal (horizontal) with three-phase standard motor Product no.: LDX090-04-050 Manufacturer: HEW (with ATEX certificate) Power P: 1.1 kW Speed n: 1500 rpm Voltage U: stamped with motor nameplate according to IEC38, (wide voltage range): 220-240 volt triangle 380-415 volt star at 50 Hz 220-240 volt triangle 380-415 volt star at 60 Hz 250-280 volt triangle 440-480 volt star at 60 Hz Voltage tolerance +/- 5% in each case Frequency f: 50/60 Hz Protection class: IP 55 Insulation class: F with 3 PTC conductors for FU operation Efficiency class: IE3 Ignition protection class: II 2G Ex db eb IIC T4 Gb Design: B 5 Coating: RAL 7037 (HCN smooth paint) ATEX - Identification plate: ETY924-D-E--PE03 ATEX stamp: II 2G Ex h IIB T3 Gb X Please comply with the provisions of Directive 2014/34/EU (ATEX) regarding the use of our pumps in potentially explosive areas. Prerequisite for operation: Ex - zone 1 (gas), temperature class T3, Ambient temperature - 20 to 40 °C Limit temperature 100°C Pump unit suitable for on-site FU operation 5-87 Hz |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for Steimel - T 3 - 80 P - GKGM gear pump number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Chile Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
studs
hexagonal nut
drum
gear pump unit
packing ring
mechanical seal
gear pump
gasket
deep groove ball bearing
radial shaft seal
counter pinion
drive pinion
gear pump
lifting stirrups
hand time clock
profile gasket
gas strut
tubular heater
motor clamping flange
counter pinion